# Python Basics for Beginners – Python | Basic Operators

Hits: 79

## Python Basics for Beginners – Python | Basic Operators

Operators are the constructs which can manipulate the value of operands.

Consider the expression 4 + 5 = 9. Here, 4 and 5 are called operands and + is called operator.

## Types of Operator

Python language supports the following types of operators.

• Arithmetic Operators
• Comparison (Relational) Operators
• Assignment Operators
• Logical Operators
• Bitwise Operators
• Membership Operators
• Identity Operators

Let us have a look on all operators one by one.

## Python Arithmetic Operators

Assume variable a holds 10 and variable b holds 20, then −

Operator Description Example
+ Addition Adds values on either side of the operator. a + b = 30
– Subtraction Subtracts right hand operand from left hand operand. a – b = -10
* Multiplication Multiplies values on either side of the operator a * b = 200
/ Division Divides left hand operand by right hand operand b / a = 2
% Modulus Divides left hand operand by right hand operand and returns remainder b % a = 0
** Exponent Performs exponential (power) calculation on operators a**b =10 to the power 20
// Floor Division – The division of operands where the result is the quotient in which the digits after the decimal point are removed. But if one of the operands is negative, the result is floored, i.e., rounded away from zero (towards negative infinity) − 9//2 = 4 and 9.0//2.0 = 4.0, -11//3 = -4, -11.0//3 = -4.0

## Python Comparison Operators

These operators compare the values on either sides of them and decide the relation among them. They are also called Relational operators.

Assume variable a holds 10 and variable b holds 20, then −

Operator Description Example
== If the values of two operands are equal, then the condition becomes true. (a == b) is not true.
!= If values of two operands are not equal, then condition becomes true. (a != b) is true.
<> If values of two operands are not equal, then condition becomes true. (a <> b) is true. This is similar to != operator.
> If the value of left operand is greater than the value of right operand, then condition becomes true. (a > b) is not true.
< If the value of left operand is less than the value of right operand, then condition becomes true. (a < b) is true.
>= If the value of left operand is greater than or equal to the value of right operand, then condition becomes true. (a >= b) is not true.
<= If the value of left operand is less than or equal to the value of right operand, then condition becomes true. (a <= b) is true.

## Python Assignment Operators

Assume variable a holds 10 and variable b holds 20, then −

Operator Description Example
= Assigns values from right side operands to left side operand c = a + b assigns value of a + b into c
+= Add AND It adds right operand to the left operand and assign the result to left operand c += a is equivalent to c = c + a
-= Subtract AND It subtracts right operand from the left operand and assign the result to left operand c -= a is equivalent to c = c – a
*= Multiply AND It multiplies right operand with the left operand and assign the result to left operand c *= a is equivalent to c = c * a
/= Divide AND It divides left operand with the right operand and assign the result to left operand c /= a is equivalent to c = c / a
%= Modulus AND It takes modulus using two operands and assign the result to left operand c %= a is equivalent to c = c % a
**= Exponent AND Performs exponential (power) calculation on operators and assign value to the left operand c **= a is equivalent to c = c ** a
//= Floor Division It performs floor division on operators and assign value to the left operand c //= a is equivalent to c = c // a

## Python Bitwise Operators

Bitwise operator works on bits and performs bit by bit operation. Assume if a = 60; and b = 13; Now in the binary format their values will be 0011 1100 and 0000 1101 respectively. Following table lists out the bitwise operators supported by Python language with an example each in those, we use the above two variables (a and b) as operands −

a = 0011 1100

b = 0000 1101

—————–

a&b = 0000 1100

a|b = 0011 1101

a^b = 0011 0001

~a  = 1100 0011

There are following Bitwise operators supported by Python language

Operator Description Example
& Binary AND Operator copies a bit to the result if it exists in both operands (a & b) (means 0000 1100)
| Binary OR It copies a bit if it exists in either operand. (a | b) = 61 (means 0011 1101)
^ Binary XOR It copies the bit if it is set in one operand but not both. (a ^ b) = 49 (means 0011 0001)
~ Binary Ones Complement It is unary and has the effect of ‘flipping’ bits. (~a ) = -61 (means 1100 0011 in 2’s complement form due to a signed binary number.
<< Binary Left Shift The left operands value is moved left by the number of bits specified by the right operand. a << 2 = 240 (means 1111 0000)
>> Binary Right Shift The left operands value is moved right by the number of bits specified by the right operand. a >> 2 = 15 (means 0000 1111)

## Python Logical Operators

There are following logical operators supported by Python language. Assume variable a holds 10 and variable b holds 20 then

Operator Description Example
and Logical AND If both the operands are true then condition becomes true. (a and b) is true.
or Logical OR If any of the two operands are non-zero then condition becomes true. (a or b) is true.
not Logical NOT Used to reverse the logical state of its operand. Not(a and b) is false.

## Python Membership Operators

Python’s membership operators test for membership in a sequence, such as strings, lists, or tuples. There are two membership operators as explained below −

Operator Description Example
in Evaluates to true if it finds a variable in the specified sequence and false otherwise. x in y, here in results in a 1 if x is a member of sequence y.
not in Evaluates to true if it does not finds a variable in the specified sequence and false otherwise. x not in y, here not in results in a 1 if x is not a member of sequence y.

## Python Identity Operators

Identity operators compare the memory locations of two objects. There are two Identity operators explained below −

Operator Description Example
is Evaluates to true if the variables on either side of the operator point to the same object and false otherwise. x is y, here is results in 1 if id(x) equals id(y).
is not Evaluates to false if the variables on either side of the operator point to the same object and true otherwise. x is not y, here is not results in 1 if id(x) is not equal to id(y).

## Python Operators Precedence

The following table lists all operators from highest precedence to lowest.

Sr.No. Operator & Description
1 **

Exponentiation (raise to the power)

2 ~ + –

Complement, unary plus and minus (method names for the last two are +@ and -@)

3 * / % //

Multiply, divide, modulo and floor division

4 + –

5 >> <<

Right and left bitwise shift

6 &

Bitwise ‘AND’

7 ^ |

Bitwise exclusive `OR’ and regular `OR’

8 <= < > >=

Comparison operators

9 <> == !=

Equality operators

10 = %= /= //= -= += *= **=

Assignment operators

11 is is not

Identity operators

12 in not in

Membership operators

13 not or and

Logical operators

# Personal Career & Learning Guide for Data Analyst, Data Engineer and Data Scientist

## Applied Machine Learning & Data Science Projects and Coding Recipes for Beginners

A list of FREE programming examples together with eTutorials & eBooks @ SETScholars

# Projects and Coding Recipes, eTutorials and eBooks: The best All-in-One resources for Data Analyst, Data Scientist, Machine Learning Engineer and Software Developer

Topics included: Classification, Clustering, Regression, Forecasting, Algorithms, Data Structures, Data Analytics & Data Science, Deep Learning, Machine Learning, Programming Languages and Software Tools & Packages.
(Discount is valid for limited time only)

Disclaimer: The information and code presented within this recipe/tutorial is only for educational and coaching purposes for beginners and developers. Anyone can practice and apply the recipe/tutorial presented here, but the reader is taking full responsibility for his/her actions. The author (content curator) of this recipe (code / program) has made every effort to ensure the accuracy of the information was correct at time of publication. The author (content curator) does not assume and hereby disclaims any liability to any party for any loss, damage, or disruption caused by errors or omissions, whether such errors or omissions result from accident, negligence, or any other cause. The information presented here could also be found in public knowledge domains.

# Learn by Coding: v-Tutorials on Applied Machine Learning and Data Science for Beginners

Please do not waste your valuable time by watching videos, rather use end-to-end (Python and R) recipes from Professional Data Scientists to practice coding, and land the most demandable jobs in the fields of Predictive analytics & AI (Machine Learning and Data Science).

The objective is to guide the developers & analysts to “Learn how to Code” for Applied AI using end-to-end coding solutions, and unlock the world of opportunities!